Working principle & Introduction:

JL085A Type 5-digit pulling Counter is used to record the accumulative times of the mechanical reciprocating movement. It has no reset design. When the counting times reach to 99999, re-counting can start from 00000. Its counting wheels are driven by inside pinions. When the arm on the right side of the counter is pulled, the driving mechanism connected to the arm will make the counter carry out addition counting. It is mainly applied in high-voltage switch, and it can also be applied in testing equipment, printing equipment etc.

Technical parameters:

Type	JL085A	JL085B	JL085ZM
Display digit size	H×W: 4mm×2mm
Ambient temperature	-10℃～+50℃
Max. capacity of accumulative counting	99999
Transmission ratio	1:1
Counting speed	≤300times/min	≤300times/min	≤300times/min
Pulling angle	Max. pulling angle=1°, Min. pulling angle=7°
Torque	≤4.18N·cm
Feature	Pulling at the right side, the arm turns counter-clockwise	Pulling at the right side, the arm turns clockwise	Pulling at the left side, the arm turns counter-clockwise.
Weight	≈23g
This product can be designed and manufactured according to customer’s needs.

Product installation dimension diagram: